Intel, 92 mm, 100-2000 RPM, 0.06 A / 12 V, 270 g

Improved Cooling Performance
by New Production Process

The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity.

Lower Power Consumption & Minimum Vibration

The new Alpine 12 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibrations from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance.

Extended Life Span

A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its low coil temperature.

High Quality Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

Pre-applied MX-2 Thermal Paste

The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation.

Easy and Tool-free Installation

Thanks to the push pins, the installation is really easy. Additional tools are not needed to install the cooler.

ARCTIC Alpine 12, Air cooler, 9,2 cm, 100 RPM, 2000 RPM, 0,3 sone, Black, Silver