• - Extends the distance between the DVI source and DVI display device
• - Long distance transmission – up to 60 m
• - Uses Cat 5e cable to connect the local and remote units
• - Employs ATEN EDID technology that allows signal transmission over one Cat 5e cable
• - Uses a second (Sub) Cat 5e cable for dual link signals*
• - Supports EDID Learning – Automatically learns and saves the EDID data of the display to which the Transmitter (VE602T) is connected
• - Superior video quality – DVI Dual Link up to 2560 x 1600 @ 60 Hz (40 m); DVI Single Link up to 1920x1200 @ 60 Hz (40 m), 1024 x 768 @ 60 Hz (60 m)
• - Audio enabled
• - 8 segment equalization adjustment switch optimizes display quality
• - Built-in 8KV/15KV ESD protection
• - Supports widescreen formats
• - Rack mountable
• - Note:
• - * The length of the two Cat 5e cables must be the same.
• - ** Note: HDCP is not supported

DVI Dual Link/Audio Cat 5 Extender (2560 x 1600@40m)

The VE602 DVI Dual Link Extender with Audio extends your DVI display up to 60 m away from your DVI source using Cat 5e cables. The use of Cat 5e cables provides a simple and reliable connection method that takes advantage of the wiring system in most modern office buildings.

ATEN VE602 DVI Dual Link/Audio Cat 5 Extender (2560 x 1600@40m), 2560 x 1600 pixels, AV transmitter & receiver, 60 m, Black

ATEN VE602 DVI Dual Link/Audio Cat 5 Extender (2560 x 1600@40m). Type: AV transmitter & receiver, Maximum resolution: 2560 x 1600 pixels, Cable types supported: Cat5e. Power consumption (TX): 2.4 W, Power consumption (RX): 2.86 W. Receiver dimensions (WxDxH): 56 x 24 x 91.3 mm, Receiver weight: 180 g, Transmitter dimensions (WxDxH): 56 x 24 x 91.3 mm